In most installations, the myanywAiR next device connects automatically through the setup wizard in the app.
If you need to manually configure the Wi-Fi network (for example, when connecting to a hidden SSID), follow the steps below.

Step 1. Locate the Device Broadcast

When in configuration mode, your device will broadcast a temporary Wi-Fi network such as:

  • ANYWAIR-I-XXXXX

  • C-ANYWAIR-I-XXXXX

(The “XXXXX” represents the device’s unique ID.)


Step 2. Connect to the Temporary Network

  1. On your smartphone, tablet, or laptop, open Wi-Fi settings.

  2. Select the broadcasted ANYWAIR-I-XXXXX (or C-ANYWAIR-I-XXXXX) network.

  3. Wait for your device to connect — there will be no internet access at this stage.

Step 3. Access the Configuration Page

  1. Open a browser (e.g., Chrome or Safari).

  2. In the address bar, type:
    ? http://192.168.4.1

  3. Press Enter to load the configuration interface.

Step 4. Select or Enter Wi-Fi Details

On the configuration screen:

  • Tap “Select Network” to view a dropdown list of available Wi-Fi networks.

  • If your network is hidden, choose “Enter SSID Manually.”

  • Enter the Wi-Fi network name (SSID) and password.

  • Tap “Configure.”

Step 5. Finalize Connection

  • The device will store your Wi-Fi details and attempt to connect.

  • Once successful, the LED indicator will turn off or solid green, confirming that it’s connected and operational.

  • Reconnect your phone to your home/office Wi-Fi and open the myanywAiR next app — your device should now appear online.

Troubleshooting Tips

  • Ensure you’re using a 2.4 GHz Wi-Fi band (5 GHz is not supported).

  • Double-check that the SSID and password are entered exactly as shown, including capital letters.

  • If connection fails, reset the Wi-Fi settings by holding the device button for 10 seconds, then repeat setup.

  • During configuration, the LED sequence will typically progress through:
    ? Green Steady → Green Blinking → Yellow Blinking → Red Blinking → Off (connected).