1. LED Status During Wi-Fi Configuration

LED ColorBehaviorDescription
BlueBlinkingPerforming WPS connection (up to 2 minutes)
MagentaBlinkWPS connection error
WhiteBlinkingIdentifying IntesisHome device
GreenSteadyDevice not configured
GreenBlinkingChecking device configuration parameters (up to 2 minutes)
RedBlinkingConnecting to access point and server (up to 2 minutes)
YellowBlinkingDownloading configuration (wait up to 2 minutes)
Red – GreenAlternate blinkingError: Cannot connect to access point or router. Re-enter the Wi-Fi password and try again.
Yellow – GreenAlternate blinkingError: Server not reached. Verify internet connection on your access point or router.

2. LED Status During IR Configuration (Learning Mode)

LED ColorBehaviorDescription
WhiteSteadyWaiting for customer to press the On/Off button on the IR remote (up to 20 seconds).
GreenBlinkingIR remote controller successfully linked with the IntesisHome device.
RedBlinkingIR remote controller not linked successfully with the IntesisHome device.

3. LED Status During Normal Operation (Working Mode)

LED ColorBehaviorDescription
Off—Device not powered, or system off.
BlueSteadyIndoor unit ON – working in Cool or Dry mode.
RedSteadyIndoor unit ON – working in Heat mode.
GreenSteadyIndoor unit ON – working in Fan mode.
YellowSteadyIndoor unit ON – working in Auto mode.
CyanSteadyIndoor unit working in Anti-frost mode.
Red (3 blinks)—Command received or sent during Heat mode.
Green (3 blinks)—Command received or sent during Fan mode.
Yellow (3 blinks)—Command received or sent during Auto mode.
Cyan (3 blinks)—Command sent during Anti-frost mode.
Red (Blinking)—Device is attempting to connect to the Internet.

Summary Notes

  • Solid color = current operational mode.

  • Blinking = communication, setup, or error activity.

  • Alternate blinking (two colors) = network or server connection issue.

  • 3 blinks = command transmission acknowledgment.