Overview

The myanywAiR® system (the Wi-Fi adaptor plus mobile App) enables remote control of Fujitsu indoor air-conditioning units via smartphone or tablet. To ensure functionality, the indoor unit must be within a supported model range. This article provides guidance on compatibility for your service team and customers.

1. Compatible Unit Types and General Scope

  • The Wi-Fi adaptor is designed for Fujitsu internal units up to ~10 years old (check local region specifics).

  • Compatibility covers a wide variety of unit categories: wall-mounted, floor-console, cassette, ducted, and VRF systems.

  • Use the official compatibility list (PDF or online) to verify specific model numbers.

2. Representative Model Examples

Here are several typical model numbers that appear on the compatibility list (note: this is not exhaustive — always check the full list).

  • Wall-mounted: ASTG 30KMTA, ASTG 34KMTA, ASTG 09KMTC, ASTG 12KMTC

  • Cassette: AUTG 30KRLA, AUTG 36KRLA, AUTH 09KVLA, AUTH 12KVLA

  • Ducted: ARXK 018GLEH, ARXK 024GLEH, ARXD 012GLEH, ARXA 030GLEH

  • VRF Indoor Units: AUXK 018GLAH, AUXK 024GLAH, AUXM 018GLAH, ABYA 030GTEH

  • ANY INDOOR WITH AN IR RECEIVER

3. Key Compatibility Conditions for Service Consideration

When assessing whether a unit qualifies for myanywAiR® installation, consider the following:

  • The unit must be listed on the official compatibility list for the adaptor.

  • The indoor unit’s remote control interface (Infrared or wired) must be supported by the Wi-Fi adaptor.

  • Network & Wi-Fi environment must meet requirements (e.g., 2.4GHz Wi-Fi band often required).

  • For VRF systems, additional wall-controller or sensor settings (e.g., thermistor activation) may be required.

4. Installation & Pre-Check Workflow for Technicians

For your service team’s process:

  1. Validate model number: Record the indoor unit’s model number and cross-check the compatibility list before scheduling the Wi-Fi adaptor installation.

  2. Check remote-control interface: Ensure the existing unit’s remote or control interface is compatible with the anywAiR adaptor (e.g., has InfraRed or wired remote option, as applicable).

  3. Inspect network readiness: Confirm the site has stable Wi-Fi (ideally 2.4GHz) covering the indoor unit location, and the adaptor can be mounted and connected safely.

  4. Document unit age: If the unit is older than ~10 years, note that compatibility still may exist but support or features could be limited, so set customer expectations accordingly.

  5. Customer communication: Confirm with the customer that they understand that certain features may be limited by the unit model (e.g., advanced monitoring may not be available) and that full functionality depends on both hardware and network readiness.

5. What the Customer Should Know

  • Just because a Fujitsu unit is installed does not automatically mean it is compatible — checking the model list is mandatory.

  • Older units may work with myanywAiR®, but the guarantee of full feature support (timer, scene, remote fan speed) depends on the unit’s capabilities and the firmware/hardware combination.

  • The Wi-Fi adaptor is an add-on product, not built-in to most older units. Installation cost and time must be quoted accordingly.

  • If the indoor unit is not compatible, alternative options (e.g., replacing the indoor unit, or using a different smart-control solution) should be discussed.

Summary

The myanywAiR® system offers valuable remote-control functionality for approved Fujitsu indoor air-conditioning units. Accurate compatibility checking is essential to ensure a successful installation and positive customer experience. For any unit not listed or borderline age/model, our service team should advise accordingly and offer alternative solutions.